Reverse Phase LED Dimmer for Poultry Lighting System ACD-16A-2D 2*8A 3520W
Two-Channel Dimming Controller,Max Current 16A,Max Load 3520W,600 x 1024 IPS, DualMos Trailing-Edge AC Phase-Cutting Dimming
Introduction
The ACD-16A-2D dimming controller is a high-precision, intelligent dimming device equipped with a built-in timetable function. It is specifically designed to manage the brightness of LED lamps in poultry and livestock breeding facilities, such as chicken houses and pig houses.
The built-in timetable feature automatically adjusts the brightness of the LED lights based on a preset schedule, optimizing the management of the breeding cycle. Additionally, the controller can integrate with the 0-10V signal from an upper-level breeding controller, allowing the brightness of the LED lights to be controlled by the primary system.
For greater flexibility, the ACD-16A-2D also offers a manual control function, enabling users to directly adjust the light brightness as needed.
Features
- World-leading DualMos Trailing-Edge AC Phase-Cutting Dimming Technology: Ensures 0-100% flicker-free dimming throughout the entire process.
- 0-100% Brightness Dimming: Simulates sunrise and sunset, enhancing animal welfare.
- Built-in Farming Timetable: Includes Ramp Minutes for realistic sunrise and sunset simulations.
- Slave Mode Support: Compatible with 0-10V control signals, with configurable thresholds.
- Manual Dimming: Offers smooth and soft dimming for precise control.
- Power-Off Memory Function: Automatically resumes operation based on the original timetable after a power failure and restart.
- Manual Mode Power-Down Memory: Retains settings even during power interruptions.
- 7-inch 600×1024 IPS Capacitive Touch LCD Screen: Provides a clear and responsive interface.
- Wall-Mounted Installation: Easy and space-saving setup.
- IP65 Waterproof Rating: Ensures durability and reliability in challenging environments.
| # | Item | Detailed description |
| 1 | Screen | 600×1024 IPS capacitive touch screen, display the dimming brightness of the dimming controller, working status and parameter configuration. |
| 2 | Knob | It is used in manual mode to easily adjust the brightness of the light.
Press and hold the knob (more than 2 seconds) to switch to manual dimming mode. Rotate clockwise to increase brightness, counterclockwise to decrease brightness. A short press will switch between L1 and L2. |
| 3 | 0-10V | 0-10V signal input,Connect to 0-10V interface signal of the upper level breeding controller. |
| 4 | RS485 | RS485 interface. You can connect to the upgrade tool to upgrade the firmware through this interface. |
| 5 | Dimming output line | AC phase-cut output line to connect the lamp. There are two independent outputs L1 and L2. |
| 6 | Power cord | Enter the power cord and connect to the main power supply circuit. |
|
Dimming technology |
DualMosTrailling-Edge AC Phase-Cutting |
|
Input voltage |
100V~240VAC 50/60Hz Single-Phase Power Supply |
|
Output Load Peak(1CH) @ 220VAC |
ACD-16A-2D Max 10A 2200W |
|
Output Load Peak(Total) @ 220VAC |
ACD-16A-2D TotalMax 16A 3520W |
|
Output Load Peak(1CH) @ 110VAC |
ACD-16A-2D Max 10A 1100W |
|
Output Load Peak(Total) @ 110VAC |
ACD-16A-2D TotalMax 16A 1760W |
|
0-10VDC analog input resistance |
100Kohm |
|
Operating temperature range |
0℃ ~50℃ |
|
Operating humidity range |
≤85% RH (no condensation) |
|
Waterproof and dustproof rating |
IP65 (dust and water resistant) |
|
Housing Material |
Cast aluminum |
|
Fuse |
Dimming channel 15A 250VAC slow fuse type (6*30mm) can be replaced |
|
Touch screen |
7-inch IPS capacitive screen (resolution 600×1024) |
|
Size |
251*192*90mm |
Scan the QR code to view or download the video tutorial.
Scan the QR code to view or download the electronic user manual.
